Disclaimer

This disclaimer governs your use of the Turner Uni-Drive website (turnerunidrive.com) and the information presented on it. By accessing or using this website, you acknowledge that you have read, understood, and agree to be bound by the terms set forth below. If you do not agree with any part of this disclaimer, you should discontinue use of the website immediately.

General Information Purposes

The content published on this website is provided solely for general informational purposes. Turner Uni-Drive makes reasonable efforts to keep the information current and accurate, but we do not make any express or implied representations or warranties regarding the completeness, accuracy, reliability, suitability, or availability of the website or the information, products, services, or related graphics contained on the website for any particular purpose.

Any reliance you place on the information found on this website is strictly at your own risk. Turner Uni-Drive shall not be held responsible for any loss or damage, including but not limited to indirect or consequential loss or damage, arising from the use of or reliance on information provided on this website.

No Professional or Engineering Advice

Nothing on this website constitutes professional engineering advice, technical consultation, or a recommendation to take any specific course of action related to industrial equipment design, installation, maintenance, or operation. The information presented here is general in nature and should not be used as a substitute for consultation with qualified professional engineers, licensed contractors, or other specialists with appropriate expertise.

Before making any decisions regarding the selection, installation, modification, or operation of gearboxes, speed reducers, or related power transmission equipment, you should consult directly with a qualified engineer or contact Turner Uni-Drive's engineering team for project-specific guidance. Application-specific factors such as load requirements, environmental conditions, duty cycles, and safety regulations must always be evaluated by qualified professionals.

Product Specifications and Variations

Product descriptions, specifications, dimensions, ratings, and performance data displayed on this website are provided for reference purposes only. Actual products may differ from what is shown or described due to ongoing improvements in design and manufacturing, variations in raw materials, updates to industry standards, or customization for specific applications.

Turner Uni-Drive reserves the right to modify product specifications, discontinue products, or alter pricing without prior notice. Photographs and illustrations are representative and may not depict the exact configuration of products as delivered. Always request a formal quotation and current specification sheet from our sales team before making purchasing decisions.

No Warranties

This website and all content, materials, information, and services provided on or through it are delivered on an "as is" and "as available" basis. Turner Uni-Drive expressly disclaims all warranties of any kind, whether express, implied, statutory, or otherwise, including but not limited to implied warranties of merchantability, fitness for a particular purpose, title, and non-infringement.

Turner Uni-Drive does not warrant that the website will be uninterrupted, error-free, secure, or free of viruses or other harmful components. We do not warrant that any defects or errors on the website will be corrected.

Limitation of Liability

To the fullest extent permitted by applicable law, Turner Uni-Drive, its officers, directors, employees, agents, and affiliates shall not be liable for any direct, indirect, incidental, special, consequential, punitive, or exemplary damages arising out of or in connection with your use of or inability to use this website, including but not limited to damages for loss of profits, goodwill, data, or other intangible losses, even if Turner Uni-Drive has been advised of the possibility of such damages.

In no event shall Turner Uni-Drive's total aggregate liability exceed the amount of one hundred dollars ($100.00) or the amount you have paid to Turner Uni-Drive in the twelve months preceding the claim, whichever is less.

External Links

This website may contain links to third-party websites or resources that are not owned or controlled by Turner Uni-Drive. We provide these links for your convenience and reference only. Turner Uni-Drive has no control over the content, privacy policies, practices, or availability of any linked third-party websites and does not endorse, guarantee, or assume responsibility for the content or practices of any third-party sites.

You acknowledge and agree that Turner Uni-Drive is not responsible or liable, directly or indirectly, for any damage or loss caused or alleged to be caused by or in connection with your use of or reliance on any content, goods, or services available on or through any third-party website.

Industrial Equipment Safety

Industrial gearboxes, speed reducers, and power transmission equipment are inherently dangerous if improperly selected, installed, operated, or maintained. All equipment must be installed and operated in accordance with applicable safety codes, manufacturer guidelines, OSHA regulations, ANSI/AGMA standards, and any other relevant industry standards.

Users of Turner Uni-Drive products are solely responsible for ensuring that:

• Equipment is properly sized and rated for the intended application and operating environment.
• All guards, enclosures, and safety devices required by applicable codes and standards are installed and maintained.
• Personnel who install, operate, or maintain the equipment are properly trained and qualified.
• Routine inspection and maintenance schedules are followed in accordance with manufacturer recommendations.
• Equipment is taken out of service immediately if any abnormal condition such as excessive noise, vibration, heat, or leakage is detected.

Turner Uni-Drive assumes no liability for injuries, property damage, or losses resulting from the misuse, improper installation, inadequate maintenance, or unauthorized modification of any products referenced on this website.

Errors and Omissions

While Turner Uni-Drive strives to maintain accurate and up-to-date information on this website, errors, inaccuracies, or omissions may occasionally occur. This includes but is not limited to typographical errors, outdated information, inaccuracies in product descriptions or technical data, and omitted content.

Turner Uni-Drive reserves the right to correct any errors, inaccuracies, or omissions and to change or update information at any time without prior notice. If you believe you have identified an error on this website, we encourage you to contact us so that we may review and address it promptly.

Indemnification

You agree to defend, indemnify, and hold harmless Turner Uni-Drive, its officers, directors, employees, agents, and affiliates from and against any and all claims, damages, obligations, losses, liabilities, costs, and expenses arising from your use of this website, your violation of this disclaimer, or your violation of any rights of a third party.

Governing Law

This disclaimer and any disputes arising out of or related to this website shall be governed by and construed in accordance with the laws of the State of Missouri, without regard to its conflict of law provisions. Any legal action or proceeding relating to this disclaimer shall be brought exclusively in the state or federal courts located in Jackson County, Missouri, and you consent to the jurisdiction of such courts.

Changes to This Disclaimer

Turner Uni-Drive reserves the right to modify or replace this disclaimer at any time at our sole discretion. Material changes will be indicated by updating the "Last updated" date at the top of this page. Your continued use of the website following the posting of any changes constitutes your acceptance of those changes. We encourage you to review this disclaimer periodically.